PWC 500 GPH Automatic Pump

In the next generation sensing bilge pumps, the 500 GPH S-Series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes. Water is kept in check between 1/8" and 3/8". Improved design and performance means that our new 500 GPH pump will produce this flow at just 12 volts rather than 13.6 volts as previously required, more typical of on board voltage supply. Our next generation of Rule pumps include check valves and to do this we've created a hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks. Rule has true electromagnetic suppression (EMC) and have a built-in thermal cell that protects the pump and the vessel when things get too hot. These are the smallest automatic pumps on the market.

Features:

  • Completely automatic with manual override; no float switch needed
  • Submersible and ignition protected
  • High efficiency, low amp motor
  • Stainless-steel shaft
  • Includes backflow preventer


American Sourced Marine Parts:  


The product on this page ships worldwide from the United States by Fedex, UPS, Aramex or DHL. 
These are premium services with tracking.  Delivery to most destinations is between 6-9 business days. 
The minimum freight charge is AUD$85 (about US$57) See table below.


All prices shown are in Australian AUD$.

We sell this part by the manufacturer's part number.  These products are special order from the USA, meaning 
there are no returns, no exchanges and no refunds possible.  The sale is final.


Prices include Australian 10% GST, but may be subject to further customs fees or charges if the order is over AUD$1000. 
Shipments outside of Australia are tax free.


Any additional import fees are paid by the customer.  We will assist with customs formalities if necessary.


Manufacturer's warranty applies.  The warranty is in the box.  If a product is dead on arrival, we will replace it.   
Where possible warranty DIY spare parts will be provided.  
MarineDirect Australia will contribute $50 towards your return freight charges to the USA 
within one year of order if there is a warranty issue.


Dangerous Goods: 


Liquids, gels, pastes and replacement lithium batteries may not ship under any circumstances.


Grey Marketing & Compliance:  


Where a brand has an established distributor in 
Australia, we will decline to sell it.  
Most such brands and products have been removed 
from our American listings.     
Some items shown within this category are intended only 
for the American marketplace and 
may not be compliant with Australian Standards 
and in which case we cannot sell them to you and/or will refund you.




Express Freight Charges:  Total freight cost is based on the weigh of the package. 


The default freight charge is $85 for the first kilo.


The shipping weight kg of the item is shown 
under the Specifications tab above.


We use Fedex, UPS, DHL and Aramex Fedex which is generally a 6-9 business day service. Tracking is provided. 


Following your purchase we will calculate the freight charges based on the table below.   The default shipping rate for 1kg for any order is $85. 


If the weight is greater than 1 kilo, then the following additional amounts will be payable in arrears AUD$ and prior to shipping:


 


0-1kg $85 (This is the default rate)


>1-2kg  +$40


>2-3kg  +$65


>3-4kg  +$80


10kg    +$185


15kg    +$240


20kg    +$295


Some bulky items may be classified as oversize regardless of their weight.  Freight charges over 1 kilo will be based on the table above.


 

(78024)

SKU 78024
Shipping Weight 0.6000kg